Asus P8H61 USB3 R2.0 User Manual page 40

5. Intel H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
P8H61/USB3 R2.0
P8H61/USB3 R2.0 Intel
• You must install Windows
• Due to H61 Chipset limitation, AHCI Mode only works on Windows
• [IDE] is the default SATA type. Under Windows
• To configure the SATA type in BIOS, click Advanced Mode > Advanced tab > SATA
• When using hot-plug and NCQ on Windows
1-30
SATA 3.0Gb/s connectors
®
hard disk drives.
Please use IDE Mode on Windows
SATA type.
Configuration > SATA Mode Selection.
Selection item in the BIOS to [AHCI]. See section 2.5.3 SATA Configuration for details.
XP Service Pack 3 or later version before using Serial ATA
®
XP.
®
XP, there is no need to change the
®
Vista / Windows
®
Vista / Windows
® ®
7, set the SATA Mode
®
ASUS P8H61 R2.0 Series
7.