Problems Concerning Easymp Slide Converter; Convert To Fse Is Not Displayed In The Powerpoint Right Click Menu; Cannot Convert To A Scenario; Cannot Play Scenarios - Epson PowerLite Pro G5450WU Operation Manual

Troubleshooting

Problems Concerning EasyMP Slide Converter

Convert to FSE is not displayed in the PowerPoint right click menu.

Check
Was PowerPoint installed after installing EasyMP Slide
Converter?

Cannot convert to a scenario.

Check
Is PowerPoint running?
Was Slides or Custom Show set as the Slide View setting? You cannot convert when Slides or Custom Show is set as the Slide View setting. Select All as the Slide

Cannot play scenarios.

Check
Is the correct resolution selected?
The menu may not be displayed, if PowerPoint is installed after installing EasyMP Slide Converter.
Reinstall EasyMP Slide Converter.
Close PowerPoint before starting conversion. Also, do not start PowerPoint during conversion.
View.
When the resolution of the projector that is projecting the scenario is XGA type, scenarios for which
WXGA (1280 x 800 dots) is set cannot be played back. Project after converting the PowerPoint file to
an XGA (1024 x 768 dots) scenario file.
Remedy
Remedy
Remedy
19