Printer Setting; Rs-232C Setting - Oki LP441s Manual

7. Printer setting

How to change the printer communication setting is as follows.

7.1 RS-232C setting

1. Select "RS-232C(R)" in "Printer settings (P)" menu.
Fig. 7-1-1 Printer setting (RS-232C selection screen
2. Select the values of "Baud rate", "Parity" and "Flow control".
Fig. 7-1-2 Printer setting (RS-232C screen
3. Click "Set" to set setting the value to printer.
4. Following screen is displayed when setting is complete. Click "OK" and restart the printer to
enable the setting.
Fig. 7-1-4 Setting completion screen
Printer configuration tool
14
Table7-1-2 Printer setting RS-232C item list
Item Initial
value
Baud rate 19200
(bps)
Parity NONE
Flow control NONE
Setting range
9600,19200,38400,
57600,115200(bps)
NONE,ODD,EVEN
NONE,HARD(RTS/
CTS)