Protocol Setting - Oki LP441s Manual

6.4 Protocol setting

Before starting communication with the printer, the printer setting tool needs to be set for
enabling communication with the printer.
1. Select "Protocol (P)" in "Tool settings(T)" menu.
Fig. 6-4-1 Tool setting (Protocol setting) selection screen
2. Change setting value, and click "Apply".
Fig. 6-4-2 Tool setting (Protocol setting) screen
Table6-4-2 Tool item setting (Protocol setting) list
Item
CRC check setting
Control code setting
Protocol code
setting
Printer configuration tool
Setting range
ON, OFF
ON, OFF
00 - FF HEX
Restrictions
Only effective when printer uses wireless LAN or
Bluetooth is active.
The value being used in other protocol code cannot
be set. When other control code and command,
code included in printer data are specified as
protocol code, printer operation is not warranted.
13