Interface Specifications - Oki LP441s User Manual

Interface Specifications

Through a combination of DIP switch settings and turning the printer ON with
certain buttons held down, you can enable or disable special functions and
features.
Warning: Never connect or disconnect interface cables
(or use a switch box) with power applied to
either the host or the printer. This may cause
damage to the interface circuitry in the printer/
host and is not covered by the warranty.
On-line Command Compatibility Settings
DIP Switch
Settings
1 2 3
ON ON ON
ON ON ON
ON
Function
Procedure
4
ON Switch to MB200 emulation command
compatibility
With printer turned off:
• Open the cover.
• Press and hold PRINT button.
• Press the POWER button to turn the printer on.
ON Switch to SBPL command compatibility
With printer turned off:
• Open the cover.
• Press and hold FEED button.
• Press the POWER button to turn the printer on.
OFF
53