Status Leds For Printing Modes; Status Leds For The Test Print Mode - Oki LP441s User Manual

4. Press and hold the FEED button while turning the printer
on.
5. Close the cover.
When setting the dispense mode, the STATUS LED blinks
green, and turns into a steady green signal upon completion
of setting. Turn off the printer ONLY when the STATUS LED is
a steady green light.

Status LEDs for Printing Modes

Available modes include Normal, Test Print, Head Check
Setting and Online Command Setting mode.
Status LEDs for Normal Mode
Operational State
START OF PRINTING
ONLINE
OFFLINE
STANDBY (after 5
seconds of inactivity)
Note: The Battery indicator (only available on the Bluetooth/
WLAN model) remains lit even when the printer is
OFFLINE. During the Standby state, the printer
resumes normal operational status upon sensing any
incoming data or pressing of the buttons.

Status LEDs for the Test Print Mode

Enter Test Print mode by using the FEED and POWER buttons.
Operational State
ENTERING TEST
PRINT MODE
START OF TEST
PRINT
DURING TEST PRINT
END OF TEST PRINT
STATUS LED
Orange
Green
OFF
Green
STATUS LED
Orange
Green
Green
OFF
50
LED Action
Steady
Steady
NA
Blinks every 4
seconds
LED Action
Steady
Blinks
Steady
NA