Asus P5S-VM User Manual page 32

III. HARDWARE SETUP
21. Wake-on-LAN Activity Connector (3-pin WOLCON)
The WOLCON connector allows the system to power up when there is a wakeup
packet or signal is received from the network through the ASUS PCI-L101 LAN
card (see ASUS LAN CARD).
IMPORTANT: This feature requires that the WAKE On LAN Power Up Control is
set to Enabled (see Power Management Setup under BIOS SOFTWARE) and that
your system has an ATX power supply with at least 720mA +5V standby power.
P5S-VM Wake-On-LAN Connector
22. Stereo Audio In Connector (4-pin CD_IN) /
23. MODEM Card Voice In Connector (4-pin MODEM)
(with optional onboard audio)
CD_IN allows you to receive stereo audio input from an internal CD-ROM
drive or other sound sources, such as a TV tuner or MPEG card. MODEM al-
lows mono inoput and output for a compatible voice modem microphone and
speaker interface.
P5S-VM Stereo Audio In / Modem Card Voice In Connectors
32
IMPORTANT: Requires an ATX power
supply with at least 720mA +5-volt
standby power
Ground
PME
+5 Volt Standby
ASUS P5S-VM User's Manual
CD_IN
Right Audio Channel
Ground
Ground
Left Audio Channel
Modem-In
Ground
Ground
Modem-Out