Chipset - Asus P5QL PRO - Motherboard - ATX User Manual

CPU TM function [Enabled]
Enables or disables Intel® CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are
reduced when the CPU overheats. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology.
Setting this item to [Disabled] forces the XD feature flag to always return to zero
(0). Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel® Pentium® 4 or
later CPU that supports the Enhanced Intel SpeedStep® Technology (EIST).
Intel® SpeedStep™ Technology [Enabled]
Allows you to use the Enhanced Intel® SpeedStep® Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the
EIST. Configuration options: [Enabled] [Disabled]
4.5.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
North Bridge Configuration
Advanced
North Bridge Chipset Configuration
Memory Remap Feature
PCI MMIO Allocation:
Memory Hole
Initiate Graphic Adapter
4-24
BIOS SETUP UTILITY
Advanced
BIOS SETUP UTILITY
[Enabled]
4GB To 3328MB
[Disabled]
[PEG/PCI]
Configure North Bridge
features.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Chapter 4: BIOS setup