4.
Silicon Image
(7-pin SATA_E1 [Port0, Orange], SATA_E2 [Port1, White] )
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
•
•
Before using the Drive Xpert technology, make sure that you have connected
the SATA signal cables and installed SATA hard disk drives.
Refer to 4.3.10 ASUS Drive Xpert for detailed application instructions.
2-28
Serial ATA RAID connectors
®
The SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) ports are for
SATA hard drives only. ATAPI device is not supported.
Make necessary backup before using the Drive Xpert function: All data of
the SATA_E2 (port1) hard drive will be erased for EZ Backup setup. All
data of the two hard drives will be erased for Super Speed setup.
Chapter 2: Hardware information