Asus P5Q PRO - Motherboard - ATX User Manual page 152

Using Drive Xpert function in BIOS setup environment
You may use Drive Xpert function in BIOS setup environment. To enter BIOS setup,
press DEL key after powering on. Drive Xpert configuration options are under
Tools menu.
Before using the Drive Xpert function, ensure that you have back up all your
data in your hard disks.
•
•
Main Ai Tweaker
ASUS EZ Flash 2
Drive Xpert Control
Drive Xpert Mode Update
Update To Super Speed
Update To EZ Backup
Update To Normal Mode
Express Gate
Enter OS Timer
Reset User Data
ASUS O.C. Profile
AI Net 2
Drive Xpert Control [Auto]
This item allows you to enable or disable the Drive Xpert function.
Configuration options: [Auto] [Enabled] [Disabled]
Drive Xpert Mode Update [Last Setting]
This item appears only when you set Drive Xpert Control to [Auto] or
[Enabled]. Set this item to [Mode Change] to show further settings of the
Drive Xpert function. Configuration options: [Last Setting] [Mode Change]
The following items appear only when you set Drive Xpert Mode Update to
[Mode Change].
Update To Super Speed [Press Enter]
This item allows you to use Super Speed function. Plug two identical SATA hard
drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on
the motherboard and press the <Enter> key.
Update To EZ Backup [Press Enter]
This item allows you to use
in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on the
motherboard and press the <Enter> key.
Update To Normal Mode [Press Enter]
This item allows you to use the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)
connectors as normal SATA connectors.
When using one hard disk in Normal Mode, connect the hard disk to the
SATA_E1 (orange, port 0) connector on the motherboard.
4-40
EZ Backup erases all original data in the hard disk connected to the
SATA_E2 (white, port 1) connector on the motherboard.
Super Speed erases all original data in both hard disks.
Advanced
[Auto]
[Mode Change]
[Press Enter]
[Press Enter]
[Press Enter]
[Enabled]
[10 Seconds]
[No]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
[Auto] [Enabled] [Disabled]
and press the <Enter> key.
allows you to use EZ Backup function. Plug two identical SATA hard drives
SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on the
and press the <Enter> key.
the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1)
as normal SATA connectors.
BIOS SETUP UTILITY
Power Boot
[Enabled] [Disabled]
SATA_E2 (white, port 1) connectors on
. Plug two identical SATA hard drives
Tools Exit
P r e s s E N T E R t o r u n
t h e u t i l i t y
s e l e c t a n d u p d a t e
B I O S . T h i s u t i l i t y
d o e s n ' t s u p p o r t :
1.NTFS format
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
connectors on the connectors on the
Chapter 4: Software support
t o