Xp 64-Bit With Raid Functions; Installing Windows Xp / Xp 64-Bit With Raid Functions - ASROCK M3N78D Installation Manual

1.3 Installing Windows

/ XP 64-bit With RAID Functions

If you want to install Windows
on your SATA / SATAII HDDs with RAID functions, please follow below procedures
according to the OS you install.
1.3.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
Configuration.
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for WindowsXP
2. Generate RAID Driver diskette for WindowsXP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
Please insert a floppy diskette into the floppy drive. Select your required
item on the list according to the mode you choose and the OS you install.
Then press any key.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
® 7 / 7 64-bit / Vista
® 7 / 7 64-bit / Vista TM / Vista
® XP / XP 64-bit With RAID Functions
®
XP / XP 64-bit on your SATA / SATAII HDDs with RAID
Advanced screen
5
TM / Vista TM 64-bit / XP
TM 64-bit / XP / XP 64-bit OS
Storage