Hardware Monitor - Asus P5N-E SLI User Manual

2.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
Hardware Monitor
CPU Q-Fan Control
Chassis Q-Fan Control
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU FAN Speed
CHA_FAN1 Speed
CHA_FAN2 Speed
CPU Fan Speed warning
F1:Help ↑↓ : Select Item
ESC: Exit →← : Select Menu
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature.
Configuration options: [Disabled] [Enabled]
Chassis Q-Fan Controller [Disabled]
Allows you to enable or disable the ASUS Chassis Q-Fan feature.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, +3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators. These items can be set to [Ignored].
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed, CHA_FAN1 Speed, CHA_FAN2 Speed
The onboard hardware monitor automatically detects and displays the CPU,
Power, and Chassis fan speeds in rotations per minute (RPM). If the fan is
not connected to the motherboard, the field shows 0. These items are not
user-configurable.
CPU Fan Speed Warning [600 RPM]
Allows you to set the CPU fan warning speed.
Configuration options: [Disabled] [600 RPM] [1200 RPM] [1600 RPM]
ASUS P5N-E SLI
Phoenix-Award BIOS CMOS Setup Utility
Power
[Disabled]
[Disabled]
[1.32V]
[3.28V]
[4.94V]
[11.84V]
66ºC
38ºC
4470 RPM
0 RPM
0 RPM
[600 RPM]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
2-39