Default; Remote Device - Q-See QC804 User Manual

In Tour mode, you will see an icon in the upper right corner of the display which allows you to
control the tour by right-clicking upon it. Clicking upon the icon will cause the tour to pause or
resume.
Window switching mode
enabled
Window switching mode
stopped

DEFAULT

The options in this window will allow you to return various settings back to their default
configuration.
The settings that will be changed are
self-explanatory.
WARNING! Language, time display mode, video format, IP address, and user
account will not retain your settings after being reset back to default values!
54
2012-02-24 10:06:56
CAM1 CAM2 CAM3 CAM4
CAM5 CAM6 CAM7 CAM8
CAM9 CAM10 CAM11 CAM12
CAM13 CAM14 CAM15 CAM16
PICTURE 4-25
DEFAULT
Please select setting entries that you want to default
Select all
ENCODE
GENERAL
SCHEDULE RS232
ALARM
NETWORK
DETECT PAN/TILT/ZOOM
DISPLAY Channel Name

REMOTE DEVICE

OK Cancel
PICTURE 4-26
4.5 REMOTE DEVICE
While cameras connected directly to the NVR through the POE ports will automatically
connect and display video, remote cameras connected to your system must be located
and added manually. This can be done through the process described in Section 2.4 IP
Cameras at the beginning of this manual or through the Remote Device window.
Use of remote devices requires that your NVR is connected to a router. These devices can
be IP cameras or even QC-series DVRs. If you intend to connect to devices that are located
outside of your local network, then this router must be able to access the Internet. Instructions
for connecting your system to the Internet are presented in the Remote Monitoring Guide
that also came on the CD with your system. It is also available from our online resource at
www.Q-See.com/Support.
Similarly, the remote devices must be able to communicate with the local network or Internet.
This will be covered in Chapter 4 of the Remote Monitoring Guide as well.
This window can be reached by clicking on
the Remote Device icon in the Main menu...
...or through the Shortcut menu by right-
clicking on the screen and selecting Remote
Device.
MAIN MENU
SEARCH INFO SETTING
REMOTE DEVICE ADVANCED BACKUP
SHUTDOWN
PICTURE 4-27
View 1
View 4
View 8
View 9
View 16
Pan/Tilt/Zoom
Color Setting
Search
Record
Remote Device
Alarm Output
Main Menu
PICTURE 4-28
55