Make A Connection - Panasonic WV-CW504S Installation Manual

Make a connection

Cautions:
• ONLY CONNECT WV-CW504 TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
• Be sure to connect the grounding lead to the GND terminal.
Power cord
(approx. 17 cm
{55.8 ft})
l Video output connection
The video output connector is connected to
the monitor or other system devices with a
coaxial cable (locally procured).
The maximum extensible length is shown in the
table.
Type of coaxial
cable
Recommended
m
maximum cable
ft
length
l Power connection
Precaution:
The following connections should be made
by qualified service personnel or system
installers in accordance with NEC 725-51.
30
BNC connector
Video output cable
(approx. 16 cm {52.5 ft})
RG-59/U RG-6/U RG-11/U
(3C-2V) (5C-2V) (7C-2V)
250 500 600
825 1 650 1 980
Brown (Live)
Blue (Neutral)
Green/Yellow (GND)
BNC connector
• Wire colors & functions
Camera power cord
Wire color
Brown
Blue
Green/yellow
RG-15/U
(10C-2V)
800
Cautions:
2 640
• Be sure to connect the GND (grounding)
lead of the camera and grounding terminal
of the power supply when using a 24 V AC
power source.
• Shrinking the cable-entry seal is a onetime
procedure. Do not shrink the cable-entry
seal until it has been ascertained that unit
is functioning.
ONLY CONNECT THIS TO 24 V AC or 12
V DC CLASS 2 POWER SUPPLY.
To 24 V AC/12 V DC*
power supply
To GND (only for 24 V AC)
* When using 12 V DC power supply,
the optional heater unit is unavailable.
BNC connector
To VIDEO IN
24 V AC 12 V DC
24 V AC (L) Positive
24 V AC (N) Negative
To GND –