Performance Considerations - Axis Q1604 User Manual

AXIS Q1604 Network Camera
Technical Specifications
Item
Function/group
Installation,
management and
maintenance
General Casing
Processor,
memory
Power
Connectors
Edge storage
Operating
conditions
Approvals
Weight
Included
accessories
Video
management
software (not
included)
Optional
accessories

Performance considerations

When settings up your system, it is important to consider how various settings and situations will affect performance. Some factors
affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the
CPU reaches its maximum, this will also affect the frame rate.
The following factors are among the most important to consider:
• High image resolution and/or lower compression levels result in images containing more data. Bandwidth affected.
• Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.
• Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and bandwidth.
• Accessing Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected.
• Heavy usage of event settings affect the product's CPU load. Frame rate affected.
• Heavy network utilization due to poor infrastructure. Bandwidth affected.
Specifications
Axis Camera Management tool on CD and web-based configuration
Configuration of backup and restore
Firmware upgrades over HTTP or FTP, firmware available at www.axis.com
Metal (zinc)
ARTPEC-4, 256 MB RAM, 128 MB Flash
Battery backed-up real-time clock
8-20 V DC or Power over Ethernet (PoE) IEEE 802.3af
max. 6.9 W, PoE Class 3
RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for 1 alarm input and 1 output
3.5 mm jack for mic in (max 80mVpp) or line mono input (max 6.2mVpp)
3.5 mm jack for line mono output (max 2.8Vpp) to active speaker
SD/SDHC memory card slot (card not included)
Support for recording to network share (Network Attached Storage or file server)
0 °C to 50 °C (32 °F to 122 °F)
humidity 20 - 80% RH (non-condensing)
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN
55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS
CISPR 22, KC, EN 60950-1, IEC60950-1
0.6 kg (1.3 lb)
Stand, connector kit, Installation Guide, CD with installation tools, recording software
and User's Manual, Windows decoder 1-user license
AXIS Camera Station - Video management software for viewing and recording up to 50
cameras
See www.axis.com/products/video/software/ for more software applications via partners
AXIS T90A Illuminators
AXIS T8412 Installation Display
AXIS Power over Ethernet Midspan 1-port
AXIS T8122 DC midspan
AXIS Camera Station and video management software from Axis' Application
Development Partners
52