Maintain; Replacing The Filter - Oreck OptiMax AIR94 User Manual

Optimax
Hide thumbs Also See for OptiMax AIR94:
Table of Contents

Advertisement

Available languages

Available languages

Maintain

2

Replacing the Filter

3
1
Velcro® is a registered trademark owned by Velcro Industries B.V. Limited Company Netherlands.
6
Under normal operating conditions the
Main Filter should be changed every six
months. Replace Odor Filter every three
months. The filters may need to be changed
more often in heavy use such as smoke or
dusty environments. You should have spare
filters available for later replacement.
Note: The filters are NOT washable.
1. When the filter light is illuminated, turn
the unit off and unplug it from the power
outlet.
2. Remove the door by holding the base of
the unit, pull door, rotate forward and
pull out.
3. Remove the used filter. Note: the Odor
filter is attached with Velcro® to the
main filter. The Odor Filter is an
optional feature. The unit will continue
to clean the air without it.
4. Remove the packaging from the new
filter(s).
5. The odor filter is reversible and attaches
to the Velcro® applied to the front of the
main filter. Place the filter(s) in the unit
according to the air flow direction arrow
as indicated on the main filter. Place new
filter(s) into the unit.
6. Replace the door by aligning and
inserting the two door tabs, located at
the bottom of the door, into the holes
provided on the unit frame.
Rotate the top of the door toward
the top of the unit and insure the
door snaps into place on both sides.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optimax air95

Table of Contents