Basic Operations; Loading/Removing Disc; Track Selection - American Audio Encore 1000 User Manual And Reference Manual

BASIC OPERATIONS

1. LOADING/EJECTING DISCS
The Encore 1000 can only play 3 inch and regular 5 inch CDs. When loading a CD into the player always hold
the disc by it edge). Load the disc label side up and never touch the signal surface (the glossy side). To remove
a disc from the player press the OPEN/CLOSE BUTTON (1), see Figure 8.
CAUTION:
• NEVER attempt to load any other objects besides 3" and 5" CDs.
• NEVER attempt to load more than one disc at a time. Doing so may result in severe damage to your unit.
• DO NOT force the transport tray open or close when the power is off, this may damage the drive system.
Figure 8: Press the Eject button to load and remove a disc. Remeber: When loading a disc always hold the disc by it
edges and load the disc label side up.
2. SELECTING TRACKS
Select a desired track by using the TRACK BUTTONS (15). Tapping the TRACK BUTTONS (15) once will select
either the next higher or lower track. You can hold down the TRACK BUTTONS (15) to change tracks continu-
ously at a faster speed. If you are using the TRACK BUTTONS (15) to select a new track during playback (a
track is already in play mode) the new track you selected will immediately begin playback as soon as the search
operation is completed.
Figure 9: Tapping the reverse
track button will jump back
to the previous track.
American Audio - www.AmericanAudio.us - Encore 1000 Instruction Manual Page 18
© ®
Figure 8
Figure 10: Tapping the for-
ward track button will skip
forward to the next track.