Clarity C110 User Manual page 10

MIC
FIG. 10
FIG. 11
FIG. 12
10
C110 INSTALLATION
C. Microphone Mode
Use this mode only if an RCA or headset port
connection is not available; for example, older
televisions that may not have audio outputs.
Connect the supplied microphone into the
"Mic" port on the back of the C110 base.
See Figure 10. Place the microphone near
the speaker of the television or stereo. See
Figure 11.
Note: The microphone will pick up any sound
in the room, such as speech, the doorbell, or
the telephone.
Telephone
The C110 has the ability to produce an audible
tone heard through the headset when the
telephone rings. The following step is neces-
sary if telephone ring notification is desired.
First, plug the telephone cord coming from
the wall into the "LINE" port at the rear of
the C110 base. A phone may be connected
to the C110 base by connecting a phone cord
from the C110 port labeled "PHONE" to your
telephone. See Figure 12.
The C110 allows you to use the same phone
wall outlet for both your phone and C110
TV Amplifier.