ClearSounds CSC48 Operating Manual page 15

Power OFF
Make a Voice
Dial Call
Redialing Last
Number
Receiving A Call
Ending A Call
Rejecting a Call
Put Call on Hold
Resume a Call
On Hold
Answering 2 nd
Incoming Call
To Switch
Between 2
active calls
Transfer call
from Neckloop
to Phone
Transfer Call
from Phone to
Neckloop
User initiated
Reconnect
Muting the
Microphone
-- ON (idle)
ON ON (idle)
ON ON (idle)
ON (ring) ON (ring)
ON (on call) ON (on call) Press and Release the MFB
ON ON (ring)
(phone ring)
ON (on call) ON (on call) Press and Hold the MFB to
ON (active On (active
call on Hold) call on Hold)
ON (on call) ON (on call) Press and Hold the MFB to
ON (on call)
ON (on call)
ON (on call)
(previously
paired)
ON (idle) ON (not
connected)
ON (on call) ON (on call) Press and Hold
15 – ENGLISH
then be discovered by
another Bluetooth device for
2 minutes.
Press and Extend Hold the
MFB until the QUATTRO is
powered OFF. A set of 4
tones plays (high to low) and
the LED is off.
Press and Release the MFB.
Follow the phone's prompt
and say the desired name
and the phone will dial the
number.
Press and Hold the MFB to
recall the last phone number
dialed (number dialed
automatically).
Press and Release the MFB
to answer the call.
to end the call.
Press and Hold the MFB to
reject the call.
place the current call on
HOLD.
Press and Hold the MFB to
retrieve the call.
put the 1
answer the 2
ON Press and Hold the MFB to
place the 2
return to the first.
ON Press and Extend Hold the
MFB to turn the QUATTRO off
(4 tones high to low), and
the call is transferred to the
phone.
OFF Press and Hold the MFB.
Once a connection is
established, the call is
transferred to the QUATTRO.
Press and Release the MFB,
and the QUATTRO will try to
reconnect to the last
connected device.
simultaneously the VOL +
and VOL – buttons to mute
the microphone. Press and
hold the VOL + and VOL –
buttons again to cancel the
muting.
st call on hold and
nd call.
nd call on hold and