ClearSounds CSC48 Operating Manual page 12

6. The phone information is now stored in the QUATTRO
memory.
7. The QUATTRO LED indicator will flash blue every 3 seconds
when paired and is now in standby mode, ready to make or
receive calls.
If the QUATTRO is not successfully paired within 2 minutes, it
will automatically leave pairing mode. If you still want pairing,
you will need to repeat the steps listed above.
IMPORTANT:
1. After the connection, if you want your cell phone to connect
automatically the next time you power on the QUATTRO,
set the QUATTRO as your authorized device or auto connect
device on your cell phone menu.
2. If you want to connect your QUATTRO to another Bluetooth
enabled device, you will need to disconnect the QUATTRO
with the paired device before establishing a connection
with the intended device.
3. Make sure the QUATTRO and phone you are using are no
more than 33 feet apart so they are within operable range.
4. If the link disconnects, (for example, the device is out of
range) the QUATTRO tries to re-establish the link and will
search for the device for a period of time.
5. The QUATTRO will automatically try to connect to the last
connected phone when powered ON for the first 90 seconds.
Disconnect Options:
1. Power off the QUATTRO
2. Switch off the Bluetooth function on the cell phone
3. Separate the QUATTRO from the cell phone at a distance of
65 feet or more.
PAIRING TO ADDITIONAL DEVICES
█
The QUATTRO now includes the Advanced Audio Distribution
Profile (A2DP) and can also connect to Bluetooth enabled
stereo audio devices for streaming media. Your QUATTRO can
12 – ENGLISH