Verifying The Installation - Extreme Networks Summit WM3600 Installation Manual

Verifying the Installation

View the LEDs on the front panel of the Summit WM3600 wireless LAN controller to
ensure the device is functioning properly. The normal LED pattern follows this path:
During the Power On Self Test (POST), the System 1 and System 2 LEDs both blink
●
green.
If the POST test fails, the System 1 LED will blink amber. If the POST test succeeds,
●
the System 1 LED will be lit solid green.
As the software is initialized, the System 2 LED will blink green.
●
After the software has finished initializing, the System 1 LED will be lit solid green
●
and the bottom System 2 LED will be off. The Summit WM3600 wireless LAN
controller is ready to be configured, as described in the Summit WM3000 Series
Controller System Reference Guide.
Other LED codes indicate the presence (or absence) of different standby states, or
errors. A guide to the Summit WM3600 wireless LAN controller LEDs codes is
provided in Chapter 3, LED
Summit WM3600 Wireless LAN Controller Installation Guide
Codes.
25