Chapter 4 Configuration
NAS
Disk Management
View the status of and configure attached USB hard disks.
Parameter
Device
Disk
Partition
Re-recognize USB Devices
Meaning
Displays information for attached USB drives. To dismount a drive,
click [Remove] in the Device column.
A disk number will be automatically assigned to the drive or you
can choose a number. Select a disk number, or select [Do not
assign], then click [Apply].
Displays the partition information for the selected USB drive. Click
[Format] to format the drive. Note: formatting a drive will erase all
information on it.
Click this to re-scan for connected USB drives.
- 62 -