Table of Contents
Advertisement
(c)
Press Enter.
NOTE
Retain period input range is between 0 and 31 days). When 0 is set,
documents are retained for an indefinite period.
Registering an F Code Bulletin box
1.
Press Bulletin Box.
(a)
Enter a sub address using the numeric keypad.
(b)
Press Enter.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
2.
Enter a box name:
(a)
Press Box name.
(b)
Enter a box name using the on-screen keyboard.
(c)
Press Enter.
NOTE
If using one-byte characters, up to 16 characters can be registered. If using
double-byte characters, up to 8 characters can be registered.
3.
If required, enter a password:
(a)
Press Password.
(b)
Using the numeric keypad enter a password.
(c)
Press Enter.
NOTE
• Up to 20 digits of numbers, * and # can be used for a password.
• Registering a password is optional.
• The same password can be registered in other boxes.
4.
If required, enable receive protect:
(a)
Press Rx Protect.
(b)
Press ON.
(c)
Press Enter.
NOTE
When Rx Protect is set to ON, only polling transmission is available.
When Rx Protect is set to ON, Auto Print and OverWrite features are disabled.
5.
If required, enable concurrent print:
(a)
Press Auto Print.
(b)
Press ON.
Operation > 85
Advertisement
Table of Contents
