Brother MFC-9125CN Network User's Manual page 57
Multi-protocol on-board ethernet multi-functional print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9125CN:
- User manual (267 pages) ,
- Software user's manual (221 pages) ,
- Quick setup manual (48 pages)
Table of Contents
Advertisement
Control panel setup
c
(MFC-9325CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose IP Address.
Press OK.
f
Enter the IP address using the dial pad. (To enter numbers and text, see Entering Text on page 178.)
Press OK.
g
Press Stop/Exit.
Subnet Mask
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
(MFC-9125CN) Go to step d.
(MFC-9325CW) Go to step c.
c
(MFC-9325CW only)
(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose Subnet Mask.
Press OK.
f
Enter the Subnet Mask address using the dial pad. (To enter numbers and text, see Entering Text
on page 178.)
Press OK.
g
Press Stop/Exit.
6
6
46
Advertisement
Table of Contents
Troubleshooting
