First-Time Setup Of Your Device; Unpacking And Checking The Device - Fujitsu STYLISTIC M532 Operating Manual

First-time setup of your device

Gettingstarted First-timesetup
Read the chapter
The necessary hardware drivers and the supplied software for the
device are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the mains adapter, see
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery is permanently installed in the system and must be charged if you
want to use your device under battery operation.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
Refer to chapter "Connecting external devices", Page 59
external devices (e.g. mouse, flash storage) to your device.

Unpacking and checking the device

Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
Transport Packaging
► Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
Fujitsu Technology Solutions
"Important notes", Page
"Mains adapter connecting", Page
First-time setup of your device
11.
for instructions on how to connect
16. The mains
15