Panasonic Lumix DMC-GF3 Basic Owner's Manual page 263

Other Software
Quicklime
(Windows XP/Vista/7)
You can play back still pictures with audio and motion pictures (QuickTime Motion JPEG
format: .MOV extension) recorded on a digital camera.
• This is included as standard in Mac OSs.
• If you use Windows 98/98SE/Me/2000, download "QuickTime 6.5.2 for Windows" from
the following site and then install it.
http://www. apple. com/support/downloads/qu icktime652forwind ows. htm I
• Please purchase Apple QuickTime Pro to edit movies created with the camera.
Cautions for Use
• Please do not disconnect the USB connection cable when Software (supplied) is in use.
The software may not function correctly and damage the data being transmitted.
• When the access indication of the digital camera is lit or flashing, please do not disconnect
the USB connection cable. The software may not function correctly and damage the data
being transmitted. Please refer to the digital camera Owner's Manual.
• When connecting to a PC, it is recommended that you power the digital camera using a
battery with sufficient charge left on it. If the battery runs out during data transmission, the
data being transmitted may be damaged.
4
VQC8408
Installing supplied software
• Before inserting the CD-ROM, close all running applications.
(For Windows)
(For Mac)
-~u~
,;t:=;.
1
Insert the CD-ROM with the supplied
software.
The setup menu will start.
• If the setup menu does not automatically start, click [CJ]
(Start), click [Computer], double-click or open [VFFXXXX]
(part No. XXXX varies by model), and double-click
[lnstMenu.exe].
2
Click on the [Recommended Installation].
• All necessary software will be installed. (Super LoiloScope
will only install a shortcut to the trial version download site.)
• Only the software compatible with the PC in use will be
displayed.
• Proceed with installation according to messages
appearing on the screen.
• If you do not need to install all software, click on the required
software in the Custom Install and install one by one.
1
Insert the CD-ROM with the supplied software.
The folder is automatically displayed.
2
Double-click the SILKYPIX folder to open it.
3
Double-click the icon in the application folder.
• Installation starts.
5
VQC8408