Panasonic Lumix DMC-GF3 Basic Owner's Manual page 252

The LCD monitor is too bright or dark.
> Adjust the brightness of the LCD monitor to a proper level.
•
Check [LCD MODE] setting.
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
•
This may occur more often when a bright lens, such as the interchangeable lens (H-H014), is
used for recording in brightly lit outdoor environments.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor.
Others
LCD monitor
(P64)
- 196 -
(P64)