Entering An Address With A Zip Code - Clarion NX602 Owner's Manual

5. Instead of entering the street name, tap
city/town becomes the destination of the route.
6. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
7. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.1.8 Entering an address with a ZIP code

All of the above address searching possibilities can be performed with entering the ZIP code instead of
the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
2. In the Navigation Menu, tap the following buttons:
3. Select the country and state as described earlier (page 26).
4. Enter a new city/town using its ZIP code:
a. Tap
to confirm the destination, or tap
and start your journey.
.
. This way the center of the displayed
) appears at the new location. Tap
to select a different
to modify route parameters, or tap
to return to the Navigation Menu.
, .
NX702 English 39