Cd/Mp3; Playback; Repeat Play; Random Play) - Alpine CDE-134HD Quick Reference Manual

CD/MP3

SOURCE/
 
Rotary encoder

/ENTER


1

Playback

1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
2
While playing back MP3, press 1 or 2 to select the
desired folder.
Pressing and holding 1 or 2 will change folders continuously.
3
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing  again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• The "" indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The track number displayed for Mp3 playback is its corresponding file
number recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• During CD/MP3 playback, press  to return to the last selected
search mode.
12
-EN

2 4 5

Repeat Play

1
Press a4.
The song is played back repeatedly.
*1 *2
a  a  (off )  a
*1 Only a track/file is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3 mode
only)
2
To cancel repeat play, select (off) with the above
procedure.
M.I.X. (Random Play)
1
Press 5s.
The songs are played back in random sequence.
*1 *2
 s  g
s
*1 The tracks are played back in random sequence. (CD mode
only)
*2 Only files in a folder are played back in random sequence. (MP3
mode only)
*3 The files in the disc are played back in random sequence. (MP3
mode only)
*4 In the USB mode, all files stored in the Flash Memory are played
back in random sequence.
2
To cancel M.I.X. play, select (off) with the above procedure.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
This will set the search mode, and the "" indicator lights up.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
• Press  in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
*3/*4
 (off )  s