Panasonic RC-DC1 Operating Instructions Manual page 14

8
Press [ALARM 1] or [ALARM 2] to
confi rm.
"IPOD" selection: Continue with steps 9
and 10.
"RADIO" selection: Continue from steps 11
to 14.
Setting iPod alarm
9
Press [2/–, ADJ] or [+/6, ADJ] to
adjust the volume level.
10
Press [ALARM 1] or [ALARM 2] to
confi rm the setting.
Note:
• The buzzer will sound if no iPod or iPhone is
detected at the set alarm time.
• Music will be played from the iPod or iPhone's
library when the alarm sounds.
Setting radio alarm
11
Press [2/–, ADJ] or [+/6, ADJ] to
adjust the volume level.
12
Press [ALARM 1] or [ALARM 2] to
confi rm.
13
Press [2/–, ADJ] or [+/6, ADJ] to
select the desired preset channel.
14
Press [ALARM 1] or [ALARM 2] to
confi rm the setting.
14 14
Note:
• Alarm will function only when powered by AC
power.
• To activate or display the alarm setting, press
[ALARM 1] or [ALARM 2] once.
• Press [ALARM 1] or [ALARM 2] again to
deactivate the alarm function.
Turning off the alarm
Press [ALARM OFF] to turn off the alarm.
The alarm will sound at the same time on the
next day.
Note:
If the alarm is not turned off, it will sound
continuously for 59 minutes before turning off
by itself.
Snoozing the alarm
Press [SNOOZE] when the alarm sounds to
stop it for a few minutes.
The alarm will sound again after 9 minutes.
Tip:
For iPod touch and iPhone users, use the
Memory Loader application to unlock custom
alarm settings (Z page 15).