Making The Connections; Setting The Clock - Panasonic RC-DC1 Operating Instructions Manual

Making the connections

Rear view
To household
mains socket
Connect the AC adaptor.
• Do not use an AC adaptor from other
equipment.
• Do not use any other AC adaptors except the
supplied one.
• The unit is in the standby condition when the
AC adaptor is connected. The primary circuit
is always "live" as long as the AC adaptor is
connected to an electrical outlet.
10 10
FM indoor
antenna

Setting the clock

The clock is displayed once the main unit is
connected to the household mains socket.
Reset the clock regularly to maintain accuracy
(monthly accuracy + /– 60 seconds).
1
Press and hold [SET/PRESET] for 2
seconds.
2
Press [2/–, ADJ] or [+/6, ADJ] to
select the day.
3
Press [SET/PRESET] again to confi rm.
4
Repeat steps 2 and 3 to set the hour and
minute.
Example:
To change the clock display
In clock mode, press and hold [+, VOL] and
[–, VOL] at the same time for 2 seconds to select
between a 12-hour or 24-hour display.
For 12-hour display:
AM : "PM" is not displayed.
PM : "PM" is displayed.