Playing A Blu-Ray Disc Player/Dvd Player; Playing Super Audio; Adjusting The Master Volume; Turning Off The Sound Temporarily - Marantz SR6007 Owner's Manual

Adjusting the master volume

VOLUME df
Use to adjust the
volume.
• The volume display method varies
depending on the "Scale" setting
(vpage 113).
n When the "Scale" setting
(vpage 113) is "0 – 98"
GAdjustable rangeH 0.0 0.5 – 98.0
n When the "Scale" setting (vpage 113) is "–79.5dB –
18.0dB"
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning
main unit.

Turning off the sound temporarily

MUTE :
Press .
• "MUTE" appears on the display.
:
• appears on a TV screen.
• The sound is reduced to the level set at "Mute Level" (vpage 113).
MUTE :
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
DVD
Important information
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
POWER X
Press
to the unit.
3
Press Blu-ray
player used for playback.
4
Play the Blu-ray Disc player or DVD player.
VOLUME
on the • Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
to turn on power
or DVD to switch an input source for a
36
Playing Super Audio CD
The following describes the procedure for playing Super Audio CD.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
POWER X
Press to turn on power
to the unit.
3
Perform the settings of the "Input Assign" menu
(vpage 122).
Assign HDMI connectors for the input source (example: DVD).
4
Press the input source select button (example: DVD)
to switch an input source assigned in step 3.
5
Set the audio input mode to "Auto" using the "Input
Mode" menu (vpage 124).
• The default setting of "Input Mode" is "Auto".
6
Play the component connected to this unit.
When playing back Super Audio CD, DSD signals are converted into
PCM signals which are then converted into analog signals.