Playback (Basic operation)
Setup (vpage 28)
n Turning the power on (vpage 35)
n Selecting the input source (vpage 35)
n Adjusting the master volume (vpage 36)
n Turning off the sound temporarily (vpage 36)
n Playing a Blu-ray Disc player/DVD player
(vpage 36)
n Playing Super Audio CD (vpage 36)
n Playing a CD player (vpage 37)
n Playing an iPod (vpage 38)
n Playing a USB memory device (vpage 41)
n Listening to FM broadcasts (vpage 44)
n Listening to internet radio (vpage 52)
n Playing back files stored on a PC and NAS
(vpage 55)
n Using online services (vpage 59)
n Convenient functions (vpage 67)
n AirPlay function (vpage 71)
Selecting a listening mode (Sound Mode)
(vpage 73)
Playback (Advanced operation) (vpage 95)
DVD
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press
POWER X
to turn on power to
the unit.
The power turns on.
You can also switch the power to standby by pressing
STANDBY
on the main unit.
n When power is switched to standby
POWER X
Press
.
GSTANDBY indicator status in standby modeH
• Normal standby : Red
• When "HDMI Control" (vpage 118) is set to "On" : Orange
• When "IP Control"
(vpage
131) is set to "Always On" :
Orange
35
Selecting the input source
Press the input source select button
(
CBL/SAT
,
DVD
,
Blu-ray
,
AUX
MEDIA PLAYER
TV AUDIO
,
,
CD
,
TUNER
,
iPod/USB
,
M-XPort
NETWORK
INTERNET
,
or
RADIO
) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
INPUT SELECTOR
Turn
.
INPUT SELECTOR
X ON/
• Turning
switches the input source, as shown
below.
CBL/SAT
DVD
Blu-ray
PHONO
M-XPort
TV AUDIO
GAME
,
,
PHONO
,
MEDIA
GAME
AUX
PLAYER
iPod/USB
NETWORK
FM
CD