Insignia NS-42D240A13 User Manual page 25

Insignia 42" 1080p LED TV
B If you select Cable, a message asks if you
have a cable box:
Do you have a Cable Box?
OK
MOVE
ENTER
No
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
How did you connect the cable box to the TV?
OK
MOVE
ENTER
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
No
Yes
SELECT PREVIOUS
MENU EXIT
AV, Component, or HDMI
Coaxial
SELECT PREVIOUS
MENU EXIT
www.insigniaproducts.com
C If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
EXIT
MOVE
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
EXIT
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1, HDMI2, or HDMI3.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.
How did you connect the satellite box to the TV?
AV, Component, or HDMI
Coaxial
OK
SELECT PREVIOUS
MENU
ENTER
or
EXIT
EXIT
to
21