Insignia NS-42D240A13 User Manual page 17

Insignia 42" 1080p LED TV
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI1 /DVI jack to connect a DVD
or Blu-ray player using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI1/DVI jack on the back of your TV.
HDMI cable with
HDMI-DVI adapter
DVD or Blu-ray player
4 Connect a 3.5mm audio cable (not provided) to
the PC IN AUDIO jack on the back of your TV
and to the AUDIO OUT jacks on the DVD or
Blu-ray player.
5 Plug your TV's power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI1, then press
ENTER.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
Back of TV
3.5mm audio cable
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
jacks on the back of your TV and to the
COMPONENT OUT jacks on the component
video device.
Cables are often color-coded to
match color-coded jacks.
Back of TV
DVD or Blu-ray player
3 Connect an audio cable to the L/R AUDIO jacks
on the back of your TV and to the L/R AUDIO
OUT jacks on the DVD or Blu-ray player.
Notes
• The L/R AUDIO jacks provide the audio
connection for a component video device
connected to the COMPONENT IN Y, P
video jacks or for a composite video device
connected to the AV IN VIDEO jack.
• When you connect the audio using the L/R
AUDIO jacks, the audio output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select Component, then press
ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
, and P
B R
Audio cable
Component video cable
, and P
B R
13