Philips 50PFL3908/F7 User Manual page 28

PC
Mode selection
HDTV
to adjust the horizontal / vertical position, clock and
Auto adjustment
phase of the PC screen automatically
Cursor ◄
Clock
to decrease setting
value
Phase
to move PC screen
Horizontal position
left
to move PC screen
Vertical position
down
You can set a particular about picture quality in Advanced settings.
Auto picture Color alignment
Backlight Noise reduction
Contrast Light sensor
Brightness Black stretch
Color Dynamic contrast
Tint Gamma
Sharpness Motion Rate
Advanced settings Dynamic backlight
Mode
Red gain
Green gain
Color alignment
Blue gain
Red offset
Green offset
Blue offset
to select the desired setting, then press OK
Noise reduction
(Off, Minimum, Medium, Maximum and Auto)
Off
*1
Light sensor
On
to select the desired setting, then press OK
Black stretch
(Off, Minimum, Medium and Maximum)
to Turn Off image enhancement
features which makes the TV to
act purely as a monitor
to enable image enhancement
features to improve picture
quality
Cursor ►
to increase setting value
to move PC screen right
to move PC screen up
Mode
Auto
On
Medium
Maximum
Off
Maximum
to set the color temperature to
Personal, Cool, Normal and Warm
When you adjust the following
settings, Personal will be set
automatically.
Cursor ◄ Cursor ►
to decrease to increase
contrast with red contrast with red
to decrease to increase
contrast with contrast with
green green
to decrease to increase
contrast with blue contrast with blue
to decrease to increase
brightness with brightness with
red red
to decrease to increase
brightness with brightness with
green green
to decrease to increase
brightness with brightness with
blue blue
to set Light sensor to Off
to adjust backlight for the best picture
quality by dynamically adjusting the
backlight intensity in accordance with
lighting condition in the room
to select the desired setting, then press OK
Dynamic contrast
(Off, Minimum, Medium and Maximum)
Cursor ◄
Gamma
to adjust the gamma encoding of images
Off
Motion Rate
On
Dynamic
to select the desired setting, then press OK
*2
(Off, Minimum, Medium and Maximum)
backlight
MPEG artifact
to select the desired setting, then press OK
reduction
(Off, Minimum, Medium and Maximum)
Off
Color
enhancement
On
to select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Tint
Custom color
management
Saturation
Brightness
Off
Film mode
Auto
Note
• Mode selection is available only if
– the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.
– the connected HDMI device is outputting a video signal.
• Adjusts backlight for the best picture quality by dynamically adjusting the backlight
intensity in accordance with lighting condition in the room when Light sensor*
to On. Please ensure the room lighting is stable and the light sensor is not blocked.
*1 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 /
39PFL2608 only.
*2 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 only.
28
Cursor ►
to set Motion Rate to Off
to make the video appear smooth
to set color enhancement to Off
to make colors more vivid and bright
Cursor ◄ Cursor ►
to rotate only
to rotate only
selected color tint
selected color tint
in
in clockwise
counterclockwise
direction
direction
to decrease color to increase color
with only selected with only selected
color color
to decrease to increase
brightness with brightness with
only selected color only selected color
to set film mode to Off
to optimize the picture recorded by
the original film
is set
1
English