HDMI-ARC connection
HDMI-ARC allows you to use EasyLink to output TV Audio directly to a
connected Audio device, without the need for an additional Digital
Audio cable.
HDMI 1 IN only
HDMI cable
Note
• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to
output Digital Audio to an HDMI home theater system.
• Be sure that the device is HDMI CEC and ARC compliant and that the TV is
connected to the device using an HDMI cable attached to HDMI-ARC connectors.
Component Analog Video Connection
Component Analog Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit's Component Video (Y/Pb/Pr) Input jacks,
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
Audio (L/R) cables
IN
IN
IN
IN
IN
IN
Component (Y/Pb/Pr) Video cables
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.
OUT
Digital home theater
amplifier
HDMI ARC
HDMI ARC
HDMI ARC
OUT
OUT
OUT
set-top box
or
OUT
OUT
OUT
Blu-ray disc/DVD
recorder
Composite Analog Video Connection
Composite Analog Video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit's Composite Video (Y/VIDEO) Input jack,
connect audio cables to the Audio (L/R) Input jacks. When the Audio is
monaural, then only connect to the Audio L Input jack.
Audio (L/R) + Video cable
IN
IN
IN
Note
• With this unit, yellow cable must be connected to Y (green) jack of Component Video
Input jacks.
• Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of an unstable picture.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Connecting the TV to the Internet using an Ethernet
cable
Ethernet cable
Note
• Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
• After connecting an Ethernet cable, set up necessary network settings. Network ➟
p.37
• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband
router functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the Ethernet port of this unit.
15
English
OUT
OUT
OUT
DVD player
Internet
LAN
Network provisioning
equipment
Continued on next page.