ASROCK Fatal1ty Z77 Professional Series User Manual page 57

STEP 3: Use "RAID Installation Guide" to set RAID confi guration.
Before you start to confi gure the RAID function, you need to check the
installation guide in the Support CD for proper confi guration. Please refer to the
document in the Support CD, "Guide to SATA Hard Disks Installation and RAID
Confi guration", which is located in the folder at the following path:
.. \ RAID Installation Guide
®
STEP 4: Install Windows
After making a SATA / SATA2 / SATA3 driver diskette and using "RAID Installation
Guide" to set RAID confi guration, you can start to install Windows
bit on your system. At the beginning of Windows setup, press F6 to install a third-
party RAID driver. When prompted, insert the SATA / SATA2 / SATA3 driver diskette
®
containing the Intel RAID driver. After reading the fl oppy disk, the driver will be
presented. Select the driver to install according to the mode you choose and the OS
you install.
After the installation of Windows
tions, you are allowed to use both "RAID Installation Guide" and "Intel Rapid Storage Infor-
mation" for RAID confi guration. Please refer to the document in the Support CD, "Guide to
SATA Hard Disks Installation and RAID Confi guration", which is located in the folder at the
following path: .. \ RAID Installation Guide and the document in the support CD, "Guide
to Intel Rapid Storage", which is located in the folder at the following path:
.. \ Intel Rapid Storage Information
If you want to use "Intel Rapid Storage" in Windows
"SATA2 driver" from the Support CD again so that "Intel Rapid Storage"
will be installed to your system as well.
XP / XP 64-bit OS on your system.
®
XP / XP-64bit OS, if you want to manage RAID func-
57
®
XP / XP 64-
®
environment, install