HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual page 50

Table 3-11 Computer Setup Menu Descriptions (continued)
Heading Option
Security Setup
Password
Power-On
Password
Smart Cover Allows you to disable cover removal sensor or to notify user if sensor has been
Device
Security
Network
Service Boot
System IDs
Data
Execution
Prevention
50 System Management
Description
Allows you to set and enable setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options,
flash the ROM, and make changes to certain PnP settings under Windows.
Allows you to set and enable power-on password.
activated.
Serial Port
Specifies if device is available or hidden to the OS.
All USB Ports
Specifies if device is available or hidden to the OS.
Front USB Ports
Specifies if device is available or hidden to the OS.
IEEE 1394 Controller
Specifies if device is available or hidden to the OS.
Network Controller
Specifies if device is available or hidden to the OS.
SCSI Controller
Specifies if device is available or hidden to the OS.
Enables/disables the ability to boot to the network by way of the F12 key or
the boot order.
Allows you to set:
• Asset tag (16-byte identifier) and ownership tag (80-byte identifier displayed during
POST).
• Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can
only be updated if the current chassis serial number is invalid. (These ID numbers are
normally set in the factory and are used to uniquely identify the system.)
• Keyboard locale setting (for example, English or German) for System ID entry.
• Monitor tracking
Enables/disables a mode that helps prevent OS security breaches.