Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP Xw460c - ProLiant - Blade Workstation Setup And Installation Manual

Slide the device bay shelf locking tab to the right to lock it.
5.
Connecting locally to a server blade with video and USB
devices
Use the local I/O cable to connect a monitor and any of the following USB devices:
•
USB hub
•
USB keyboard
•
USB mouse
•
USB CD/DVD-ROM drive
•
USB diskette drive
Numerous configurations are possible. This section offers two possible configurations.

Accessing a server blade with local KVM

For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
release buttons on the sides of the connector. Failure to do so can result in damage to the
equipment.
Connect the SUV cable to the blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Before disconnecting the SUV cable from the connector, always squeeze the
Installation 41