Enclosure Rear Panel Leds; Rear Panel Leds With Hp Pc Blade Switch - HP BladeSystem bc2800 - Blade PC Reference Manual

Enclosure Rear Panel LEDs

The enclosure rear panel LEDs differ according to which interconnect tray configuration you have
installed.

Rear panel LEDs with HP PC Blade Switch

Figure 5-11
NOTE: bc2800 shown.
This section identifies the LEDs on the enclosure rear panel with an HP PC Blade Switch .
Table 5-2
Item LED
1 Power supply power
2 Power supply fault
3 Enclosure power
4 Fan health
5 Enclosure unit identification
38 Chapter 5 Connectors, Switches, and LEDs
Rear panel LEDs with the HP PC Blade Switch
Rear panel LEDs with the HP PC Blade Switch
Status Description
Off No power to the system
Blinking green Standby, AC present
Green System power turned on
Off Power supply OK
Amber No AC power or over-voltage or over-
temperature
Blinking amber Current limit
Off No power to enclosure
Amber Enclosure shutdown; power available; hibernate
Green Enclosure power on
Off Enclosure off, fan health good
Green Enclosure on, fan health good
Amber Fan subsystem degraded
Red Fan subsystem critical
Off Unit not identified
Blue Identification of unit