Physical specifications
Prepare a location for the device that allows for the following physical and environmental requirements,
in addition to the requirements for your printer.
NOTE:
The drawings shown are not to scale.
Figure A-1
Figure A-2
Location requirements for the printer/MFP:
●
A level area on the floor
●
Space allowance around the printer
●
A well-ventilated room
●
No exposure to direct sunlight or chemicals, including ammonia-based cleaning solutions
●
Adequate power supply (15 A, 110 V, or 220 V circuit located near the printer)
●
A stable environment--no abrupt temperature or humidity changes
●
Relative humidity of 10% to 80%
●
Room temperature of 10˚ C to 32.5˚ C (50˚ F to 91˚ F)
Device weight of the HP Multifunction Finisher: 44.4 kg (98 lb)
36
Appendix A Specifications
HP Multifunction Finisher (side view)
HP Multifunction Finisher (top view)
ENWW