Command Groupings By Functionality - HP Color LaserJet 5500 Technical Reference Manual

Command
Groupings by
Functionality
Command Group
Kernel Commands
(Chapter 4)
Job Separation Commands
(Chapter 5)
Environment Commands
(Chapter 6)
This manual categorizes the PJL commands into related
groups. Each group of commands is covered in a separate
chapter, as indicated in the following table. This table lists
each command and gives a short description of each.
Command
Universal Exit
Language (UEL)
COMMENT
ENTER
JOB
EOJ
DEFAULT
SET
INITIALIZE
RESET
Command Description
Exits current printer language and
returns control to PJL.
Causes PJL to accept the
command line as a comment.
Selects a printer language for
processing the current job.
Informs printer of the start of a
print job, resets the page count,
allows naming of the job, supports
non-printing mode for printing
portions of jobs. Where supported,
it adds PJL password security.
Tells printer the print job is
complete, resets the page count.
Sets default value for environment
variables.
Sets an environment variable to a
specified value for the duration of
a PJL job.
Resets current and default PJL
variables to factory default values.
Resets current PJL variables to
default values.
Using PJL 3-5