Table of Contents
Advertisement
3.
Remove the Phillips PM2.0×3.0 screw (3) that secures the fan to the system board.
4.
Remove the fan/heat sink assembly (4).
NOTE:
system board components, it may be necessary to move the heat sink from side to side
to detach it.
NOTE:
The following illustration shows the fan/heat sink assembly removal process on a computer
model equipped with an AMD processor.
NOTE:
The following illustration shows the fan/heat sink assembly removal process on a computer
model equipped with an Intel processor.
84
Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the heat sink and
Advertisement
Table of Contents
