Table of Contents
Advertisement
4.
Remove the display assembly (2).
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display bezel:
a.
Remove the two Mylar screw covers (1) and the two Phillips PM2.5×4.0 screws (2) that
secure the display bezel to the display assembly. The Mylar screw covers are included with
the display bezel spare part kit.
b.
Flex the bottom edge (3), the left and right sides (4), and the top edge (5) of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures
71
Advertisement
Table of Contents
