Toshiba Satellite L300 Maintenance Manual page 75

3 Diagnostic Programs
In this screen, All lines which attribute could be edited and updated. The 1
in yellow with blue background) shows the attribute's value that is read from the current
system and the 2
as that in the 1
line and press Enter to confirm the current edition and continue editing the next attribute.
During the editing, user could press F2 to confirm the DMI attribute update or press F4
to ignore the modification. Press ESC to exit the program of DMI Write.
The confirmation screen is as below:
NOTE: The length OEM Part Number and OEM SW Number is max 16 Digital; others are
Max 32 Digital.
10
nd
line (the font in red with turquoise background) shows the same value
st
line before user's editing. User can modify the attribute's value in the 2
3.2 Quick Start
st
line (the font
nd