Toshiba Satellite L300 Maintenance Manual page 189

4 Replacement Procedures
Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable
Install the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable to the
following procedures and Figure 4-32.
1. Seat the power button board in the correct position.
2. Seat the AC-IN cable in the correct position.
3. Seat the CRT cable in the correct position.
4. Secure the CRT cable with two M2.5x4 black flat head screws.
5. Seat the USB cable in the correct position.
6. Secure the USB cable with one M2.5x4 black flat head screw.
7. Seat the RJ11cable in the correct position.
8. Route the RJ11cable in the wire guide.
4-54
Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual
4.18 USB Cable, CRT Cable, Power Button Board, AC-
IN cable and RJ11 cable