Toshiba Satellite L300 Maintenance Manual page 152

4.2 HDD
3. Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
4. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4
black flat head screws with M3x4 black head screws.
5. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x4 Black
flat head screw
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual
HDD chassis
HDD
Figure 4-6 Removing the HDD chassis
4 Replacement Procedures
M3x4 Black
flat head screw
4-17