HP Vectra VE 5/xxx - 2 User Manual page 77

Setup Item
Hard Disk Drives (continued)
Cylinders*
Heads*
Sectors/Track*
Multi-sector transfers*
LBA mode control*
32 bit I/O
Transfer mode*
* Only available if "User" mode has
been selected as "Type".
PC I Devices
Slot #1 Bus Master
Slot #2 Bus Master
Slot #3 Bus Master
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
Default
944 Sets the number of hard disk drive cylinders.
14 Sets the number of hard disk drive heads.
40 Sets the number of hard disk drive sectors
per track.
8 sectors Determines the number of sectors per block
for multiple sector transfers.
Enabled Enable or disable Logical Block Addressing
mode in place of Cylinder Heads Sectors.
Enabled Enable or disable 32 bit data transfer.
PI0 mode 3 Selects the hard disk drive transfer mode and
data transfer rate.
Enabled Enable this option if you need the BIOS to set
the PCI Bus Master bit. This could be
Enabled
necessary for some old PCI cards.
Enabled
Auto Select an IRQ number only if necessary (for
example for SCO-UNIX).
Auto
Auto
Auto
4 The HP Setup Program
Using the HP Setup Program
Action
English 65