HP Vectra VE 5/xxx - 2 User Manual page 15

Installation Tools
2 Place the PC on a sturdy desk near to power outlets that are easily
accessible, with enough space for the keyboard, mouse, and any
other accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Place the display on top of the computer. If you have a large display,
place it next to the computer. (Refer to the display's manual for
information about the display.)
No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, refer
to page 17, "How to Install Accessories In Your PC".
1 Setting Up Your PC
Unpacking Your PC
English 3